+86-532-86767619sales@gyrubber.cn

Categories

Guangyou Rubber Co. Ltd

Factory:Dawang Economic Area 

Office:  Qingdao Jinfu Mansion,22

Domestic Tel:     86-546-6897102

International Tel: 86-532-86767619

E-mail:  sales@gyrubber.cn

Web site:www.gyrubber.cn  


Home > News > Content

Rubber Hose Is Durable

Dongying Guangyou Rubber Co.,Ltd | Updated: Jul 17, 2017


Rubber hose selection, installation and use of the choice of rubber hose selection In the choice of rubber hose, should be based on specific applications and select the appropriate rubber hose, fittings and rubber hose assembly, consider the factors are: rubber soft The type of tube, the size of the rubber hose, the length of the rubber hose, the system working pressure, the system fluid and the use of the environment, Rubber Water Hose please refer to the product standard.

Rubber hose assembly withholding

Rubber hose fittings are varied and should be selected according to different types of rubber hoses for different joints. Note: rubber hose to be stripped of plastic and no need to peel the two types of glue, with the joints are not the same, to be stripped of the type of plastic jacket of the taps do not be too sharp, otherwise it will damage the rubber hose Floor.

Rubber Water Hose The correct buckle fittings are critical to the safety and abnormal work of the rubber hose assembly. Many types of joints, to select the appropriate joints, sets of design to the standard, reasonable, sharp groove, irregular size will buckle the wire reinforcement layer.

Joint buckle should be based on the rubber hose diameter and diameter to determine and deduction.

Rubber hose and rubber hose assembly handling and storage

Rubber hose and rubber hose assembly should always be handled with care. Rubber Water Hose Should not be dragged on sharp and rough surfaces, and should not be subjected to bending and crushing.

Rubber hoses or rubber hose assemblies are stored during storage, especially during long term storage, and should provide optimum protection and minimal damage to rubber hoses or rubber hose assemblies.

The rubber hose is composed of an inner rubber layer, a multi-layer cloth wrapping layer and an outer layer, and the cloth suction hose is composed of an inner layer, Rubber Water Hose a multi-layer cloth wrapping layer, a spiral steel wire reinforcing layer and an outer rubber layer; Outer diameter tolerance, oil, heat and other excellent performance, light, soft and durable body, and other characteristics, the minimum burst pressure for the working pressure of four times.

Rubber hose is based on the use of different media to choose the appropriate material manufacturing, product structure design is reasonable, good quality, durable, is a used to lose, suction (negative pressure conditions) a variety of liquid viscous fluid and powdered solid material Of the flexible hose. Rubber hose according to the use of:

1, water hose: for general water, -20 ℃ - 45 ℃ environment.

2, air hose: suitable for conveying compressed air and inert gas, -20 ℃ - 45 ℃ environment.

3, oil hose: suitable for conveying conventional oil, -20 ℃ - 45 ℃ environment.

4, heat-resistant hose: suitable for conveying water below 100 ℃.

5, resistant to dilute acid and alkali hose: the concentration of 40% in the concentration of dilute alkaline solution, -20 ℃ - 45 ℃ environment.

6, sandblasting hose: for the surface of the metal surface pressure sand blasting and grinding with.

7, suction and drainage, oil hose: working pressure 1.0-1.5MPa (4 times the safety factor).