Guangyou Rubber Co. Ltd

Factory:Dawang Economic Area 

Office:  Qingdao Jinfu Mansion,22

Domestic Tel:     86-546-6897102

International Tel: 86-532-86767619

E-mail:  sales@gyrubber.cn

Web site:www.gyrubber.cn  

Home > News > Content

Rubber Hose Can Resist Abrasion Of Slurry

Dongying Guangyou Rubber Co.,Ltd | Updated: Aug 30, 2017

Rubber hose is made up of multi-layer rubber and metal, nonmetal reinforced by special process. Wear-resistant layer for the innermost, select high-quality high wear-resistant rubber through the nano-formula treatment, can resist the abrasion of pulp, the skeleton layer using high-quality stainless steel made of specific inner diameter special structure metal bellows, The flexibility of the skeleton to maintain the characteristics of the rubber hose, Rubber Water Hose while protecting the hose from the destructive load pressure and collapse, reinforced by special steel cord and high-strength fabric composite, bearing the work of hydrostatic pressure, bonding layer, By special bonding agent, Rubber Water Hose each layer is compounded with rubber as a whole. Insulation layer is the use of energy-saving insulation material composite, can be based on customer demand for thickness design. Outer layer, Rubber Water Hose is based on the insulation layer design of the outer protective shell, the material is stainless steel wire production or other ultra-high polymer non-metallic materials.

Rubber hose by the thickening of wear-resistant rubber layer, multi-layer folder/cord winding reinforced layer, spiral metal steel wire skeleton layer, middle layer, wear-resistant plastic layer composition

The rubber hose is used for dredger suction and discharging mud to mortar operation, can also be used for Port, wharf, river dredging, urban drainage, and so on, room temperature suction sludge will, mortar, water, toner, concrete powder, mineral powder and other materials. Conveying medium: Dredging engineering dredger matching with drain suction mud, cleaning silt, seawater. Rubber hose in the cleaning of watercourses, dredging works, Rubber Water Hose dredger filling works, sand pumping works, reclamation works, port expansion works, Rubber Water Hose waterway dredging works and other related sediment slurry transport projects, through the dredging and suction equipment continuous work and then through the pipeline to the designated location, inseparable from the pipeline transportation.

The rubber hose comprises a skeleton layer and two inner and outer layers. The rubber layer has a very stable chemical properties, can withstand severe weather and environmental impact and erosion, the middle skeleton can make the hose will not deform. Transport of different things, Rubber Water Hose large caliber hose can be divided into different categories. Large-caliber hose can withstand positive and negative pressure, used in complex environment. For oxygen transmission, hydraulic fluid transport and so on. Large caliber hose should pay attention to many problems when using. 1, in order to prevent damage to the skeleton caused by excessive, Rubber Water Hose the bending radius should be greater than the given bending radius. 2. Transport different things, to choose different specifications of the hose. 3. In order to avoid damage caused by excessive pressure, the pressure in use should be balanced and slowly adjusted. 4. Can not be dragged to carry, so as not to scratch the outside glue, corrosion of the skeleton layer. 5. After the corrosive liquid is transported, the interior shall be cleaned and cleaned for the corrosion of the placing pipe body. Rubber Water Hose In today's many chemical production enterprises, the pipeline has been fully used, and even the pipeline has directly decided the production of production efficiency. Of course, there are many types of pipelines, and different pipelines of the material complex and diverse, according to different areas of use to determine, and, because the General Service life is relatively long, and thus can save the role of enterprise production costs.