Guangyou Rubber Co. Ltd

Factory:Dawang Economic Area 

Office:  Qingdao Jinfu Mansion,22

Domestic Tel:     86-546-6897102

International Tel: 86-532-86767619

E-mail:  sales@gyrubber.cn

Web site:www.gyrubber.cn  

Home > Knowledge > Content

Steel braided hose Caution

Dongying Guangyou Rubber Co.,Ltd | Updated: Oct 12, 2015

1. bending radius of not less than a given bend radius to prevent damage due to excessive stretching or hose skeleton, early damage.

2. Depending on the conditions, the correct selection of hose varieties, specifications, do not misuse or substitute.

3. When using a hose, the pressure should be balanced slowly adjusted to avoid a sudden pressure increase damage to the tube.

4. When changes in the workplace, should carry off the ground, do not drag the ground, so as not to scratch the outer plastic after etching skeleton layer.

5. The transport corrosive liquid, inside should be cleaned after use to prevent corrosion residue long tube, or choose the appropriate products.

Steel wire braided hose is mainly composed of a liquid-resistant synthetic rubber inner layer, middle layer, Ⅰ, Ⅱ, Ⅲ layer steel wire braid, weather-resistant synthetic rubber cover, high-pressure steel wire braided hose layer has to bear the transport medium pressure, the protective effect against erosion wires, outer layer to protect wire from damage, wire layer is a reinforcing material, from the enhancement.